Set of decals - 18 colors

Set of on-glaze ceramic decals

The transfer is screen printed and is a unique limited edition print, meaning each copy is different.

The package contains 18 pieces of overglaze decals measuring 18x28 cm in the following colors:

White, orange, light red, red, light pink, pink, purple, cobalt blue, light blue, turquoise, grass green, emerald green, light brown, brown, gray, black, silver, gold.

How to use overglaze paper

Ceramic decal is applied to burnt enamel, porcelain or glass.

1. Before applying the decal, the enamel surfaces should be degreased and cleaned, e.g. of any remaining dirt.
   Just wash with dishwashing liquid!
2. Once you have chosen your design, you can either draw it directly onto the back of the sticker, or print the image directly onto the sticker sheet using your printer.
3. Cut out a frame or the entire image from the tracing paper.
4. Place the cut-out element in a container of lukewarm water; the water temperature should be around 18-25ºC. Do not allow the stickers to soak for extended periods of time, as they will peel off in the water.
5. After a few minutes, the tracing paper should be able to be moved gently.
   It is important not to force it, as you may accidentally tear the tracing paper membrane!
6. Slowly slide the film and image off, just as it was on the paper, and apply it to the selected element. When the film is wet, you can move it around on the ceramic.
7. Carefully remove any air bubbles from the tracing paper and print. The tracing image must adhere perfectly to the enamel surface. Use a damp sponge, scraper, or your hand to do this.
8. Allow the tracing paper to dry for a few hours.
9. Apply appropriate burn curve:
   100 degrees/h to 600 degrees C
   200°C to 820°C
   End

You can use tracing paper together with overglaze gold and overglaze paints.

Firing temperature:

Recommended temperature: 750º to 820ºC

Black and white can be used at temperatures up to 1280ºC.